✣OrthoPlan StudioORTHOPAEDIC PLANNING
Planning workspace v0.1
Unvalidated prototype← Portfolio
CURRENT STUDY

Synthetic femoral shaft study

Trauma · fracture fixation·Right side·
AP VIEW SYNTHETIC
50%
DEMO / FEMURAP · RIGHT
ORTHOPLANWORKFLOW PROTOTYPE
Select an overlay to adjust it · Scroll to zoom
UNVALIDATED · NOT FOR CLINICAL USE
Synthetic scale4.00 px/mmImage coordinatesZoom 50%
AP femur · rightSynthetic demonstration image
De-identified images only.
DICOM / PACS integration is not included.
GETTING STARTED

A familiar planning workflow.
An original workspace.

  1. Import a de-identified image.

    PNG, JPEG or WebP. Files remain in browser memory; no upload, autosave, DICOM reader, or PACS connection.

  2. Calibrate against a known reference.

    Enter the physical distance, select Mark reference, then click its endpoints. Scale applies uniformly to the whole image; marker depth and projection can introduce error.

  3. Measure and explore.

    Lengths use two points. Angles use three, with the second as vertex. Circles use three points. Draw two axes to compare their acute angle. Drag handles with Select to adjust landmarks.

  4. Try generic templates or fragments.

    Template sizes are illustrative. Outline a polygon and press Enter to create a movable image fragment. Drag it or use rotation controls. Measurements remain independent of fragments.

  5. Save and review.

    Save plan exports editable JSON with its embedded image. PNG and reports contain a prototype watermark. Exported files can contain sensitive image information.

This is unvalidated development software, not TraumaCAD or a Brainlab product. It is unsuitable for clinical decisions. Clinical release requires verification, validation, licensed templates, security controls, and applicable regulatory review.

V Select · H Pan · C Calibrate · L Length · A Angle · F Fragment
Esc Cancel · Enter Finish fragment · Delete Remove · Ctrl/Cmd+Z Undo
DRAFT WORKFLOW REPORT

Review your exploration